Program Shaw Remote Control by Code

If you have a Shaw remote control as below, you can use the code I provided below to program your device.

This is Atlas PVR Universal Remote Control, which is preprogrammed to operate the Shaw cable box.
To control devices other than the Shaw digital box, do the following steps.
1) Turn on a device and, if applicable, insert video media,(eg, DVD.)
2)On the remote control, press a device key once (i.e. AUX, DVD, AUD, TV or CBL); it will blink once. Then press and hold SETUP until the selected mode key blinks twice.
3) Use the “Manufacture’s Codes” to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly, the selected mode key will blink twice.
If the selected mode key emits a long blink, the entry is invalid. Repeat steps 2 through 3 and try entering the same code again.
4) Aim the remote control at the device and press PWR once. The device should turn off. If it does not, repeat steps 2 through 3, trying each code for your brand until you find one that works. If it still does not respond, try searching for the code.
Now Let us go through the Manufacturer’s Codes.